Skip map, go to list
WyldLyfe.com

Marine Service Trades

Marine service trades are the shops and mobile crews that keep a boat running and finished: engine dealers and service departments, mobile mechanics, canvas and upholstery makers, detailers and electronics installers. A good one shows its technician credentials, writes down the work before it starts, and keeps oil, coolant and bottom paint out of the water. Use the WyldLyfe map to find marine service trades near you.

Larger circles show where this trade has more listings. Creators and conservation groups are off in this view.

Marine service trades on the WyldLyfe map, by region and state.

Coastline from US Census boundaries. Each pin sits at the center of a postal code.

How to choose

  1. Ask for the technician's certification. The American Boat and Yacht Council (ABYC) describes technician certification as the way it and the public identify people certified to perform troubleshooting, repairs and equipment installations on boats. Its listed certifications include Marine Engines and Fuel Systems, Marine Electrical and Marine Corrosion, so ask which one covers your job.
  2. Match the trade to the job. An engine dealer, a mobile mechanic, a canvas shop and an electronics installer are different businesses with different tools. Ask each one for a recent job on a boat like yours, and ask who will actually do the work.
  3. Ask when the certification was renewed. ABYC says a certified technician takes a shorter recertification exam and meets a continuing education requirement to maintain the credential. Ask the technician for the date of the last renewal.
  4. Get the work and the parts in writing. A written estimate lists the labor, the parts and what happens if the job grows. Ask what the shop will do if it finds a second problem once the engine cover or the panel is open.
  5. Ask where the work will happen. Florida's Clean Marina program lists as recommended practices that engine repairs are done indoors over an impervious surface or in a designated area, and that mechanics are trained to respond to spills. Ask any shop whether it follows the same practices on your boat.
  6. Ask what happens to old oil, coolant and paint. EPA says liquids often acceptable for recycling include used oil and used antifreeze, so ask where yours goes. Florida's Clean Marina checklist also lists recommending low-impact bottom coatings and prohibiting cleaning and scraping hull bottoms while vessels are in the water, so ask which coating the shop uses and where hull cleaning is done.

What matters on the water

This trade works where fluids, fuel and bottom paint meet the water. EPA says bilgewater can include pollutants such as oil, grease and metals. Its marina guidance says to avoid pumping bilge water that is oily or has a sheen, to use a drip pan under engines, and to check for and fix small leaks so fuel and oil stay out of the bilge. EPA's marine engine standards also require manufacturers to control evaporative emissions from fuel tanks and fuel lines.

Questions and answers

What is the difference between a marine mechanic, a canvas maker and a marine electronics installer?

A marine mechanic, a canvas maker and a marine electronics installer do different work on the same boat. ABYC lists separate certifications for Marine Engines and Fuel Systems, Marine Electrical and Marine Composites, which shows how the work divides. Canvas and upholstery shops make covers, enclosures and cushions. Ask each trade for its own credentials and examples.

Source: American Boat and Yacht Council

How do I choose a marine mechanic near me?

Choose a marine mechanic by checking credentials, scope and where the work happens. Ask for ABYC technician certification and the date it was last renewed. Get the estimate in writing. Ask whether repairs are done indoors or in a designated area, and where used oil and coolant go. The map lists shops by trade, region and state.

Source: American Boat and Yacht Council, Florida Department of Environmental Protection

Does my boat mechanic have to be ABYC certified?

ABYC certification is a credential from a standards organization. ABYC's page describes technician certification as the way ABYC and the public identify people certified for troubleshooting, repairs and equipment installations on boats, and the page does not say a law requires it. Ask the technician which certifications they hold, and ask your state agency about any license rules.

Source: American Boat and Yacht Council

How can a boat service shop keep oil and bottom paint out of the water?

A boat service shop keeps oil and bottom paint out of the water by controlling where the work happens. EPA's marina guidance recommends spill-proof oil changes, drip pans and recycling used oil and antifreeze. Florida's Clean Marina checklist lists recommending low-impact bottom coatings and prohibiting cleaning and scraping hull bottoms while vessels are in the water.

Source: U.S. Environmental Protection Agency, Florida Department of Environmental Protection

How do I list my marine service business online for free?

Joining the WyldLyfe map is free for a marine service business. Each listing shows the business's phone, location and website. The owner picks a trade and one of seven conservation causes, and a business that joins gets its own page and a free visibility report on how customers and AI assistants find it.

About this list

The list is compiled from public information: each business's name, trade, town, phone number and website. It is checked against the business's own site before it is listed. This list is compiled and kept by MediaWyld; read how we keep this list. To correct or remove an entry, open it and choose "Yours?", or remove a business here. Last reviewed November 18, 2026.

We count visits to this map with our own privacy-friendly analytics. No cookies, no personal data.

Being listed does not mean a business has joined, partnered with or hired WyldLyfe or MediaWyld.