Skip map, go to list
WyldLyfe.com

Boat builders

A boat builder designs and constructs boats, from small skiffs to large yachts, and a good one builds to federal safety standards and marks each boat with a hull identification number and a certification label. Where the rules require one, the boat also carries a capacity plate. You can check all three yourself before you buy.

Larger circles show where this trade has more listings. Creators and conservation groups are off in this view.

Boat builders across the map, by state.

Coastline from US Census boundaries. Each pin sits at the center of a postal code.

How to choose

  1. Hull identification number. Under Coast Guard rules, manufacturers must identify each boat with a twelve-character number, and two identical numbers go on each hull. On boats with transoms, the primary number goes on the starboard outboard side of the transom. Ask to see where the duplicate is.
  2. Builder code. The first three characters of the number are the manufacturer identification code. The Coast Guard's manufacturer page says builders can request one, so a boat with no code in its number deserves a question.
  3. Certification label. The label must give the manufacturer's name and address and say the boat complies with U.S. Coast Guard safety standards in effect on the date of certification. Read the name and the date, and ask which standards the label refers to.
  4. Capacity plate. For monohull boats under 20 feet, the plate must show the maximum persons, the maximum weight and the maximum horsepower, or say the boat is not rated for a motor. Sailboats, canoes, kayaks and inflatable boats are excluded.
  5. Engine and fuel system. EPA's standards require manufacturers to control exhaust emissions from marine spark-ignition engines and evaporative emissions from fuel tanks and fuel lines. Ask which engine the builder installs and what the engine maker says about meeting them. Ask what applies to the engine in your boat.
  6. Recalls and yard practice. The Coast Guard keeps a database of safety defects and non-compliance in recreational boats and associated equipment, so search the builder's name. Then ask how the yard contains sanding, painting and wash water.

What matters on the water

A boat carries its engine, fuel system and hull coatings into the water, so what the builder chooses stays with the boat. EPA's marine engine standards require manufacturers to control exhaust and evaporative emissions. In the yard, EPA's stormwater fact sheet lists sanding, painting and pressure washing among the activities that are pollutant sources, with pressure wash water carrying paint solids and heavy metals. It advises containing them. EPA has also finalized cancellation of irgarol in antifoulant paint, which it found toxic to both freshwater and marine plants, including causing the bleaching of coral.

Questions and answers

What does the Coast Guard count as a boat manufacturer?

The Coast Guard's boating safety pages address any person engaged in the manufacture, construction or assembly of boats, and the importation of boats into the United States for sale. A person who builds a boat for their own use and not for sale must get a hull identification number from the issuing authority for the boat's state of principal operation.

Source: US Coast Guard Boating Safety, eCFR, 33 CFR Part 181

How do I choose a boat builder?

Choose a boat builder by checking the hull identification number, the certification label and, where it applies, the capacity plate on a boat the builder has finished. Search the Coast Guard recall database for the builder's name. Then ask how the yard handles sanding, paint and wash water.

What is a hull identification number and where is it on a boat?

A hull identification number is a twelve-character code that identifies one boat. Characters one to three are the manufacturer code, four to eight the serial number, nine and ten the certification or manufacture date, and eleven and twelve the model year. On boats with transoms, the primary number is on the starboard outboard side of the transom.

Source: eCFR, 33 CFR Part 181

How do boat builders keep paint and wash water out of the water?

Boat builders keep paint and wash water out of the water by working in contained areas. EPA's industrial stormwater fact sheet says to pressure wash only in designated areas where wash water containment can be achieved, enclose, cover or contain blasting and sanding to the extent practical, and remove bottom paint over sealed asphalt or cement, not open ground.

Source: US Environmental Protection Agency

How do I get my boat building business on a free marine directory?

A boat builder can join the WyldLyfe map for free. You pick your trade and one of seven conservation causes, get your own page, and receive a free visibility report on how customers and AI assistants find your business. Custom yards and production builders can join.

About this list

The list is compiled from public information: each business's name, trade, town, phone number and website. It is checked against the business's own site before it is listed. This list is compiled and kept by MediaWyld; read how we keep this list. To correct or remove an entry, open it and choose "Yours?", or remove a business here. Last reviewed November 18, 2026.

We count visits to this map with our own privacy-friendly analytics. No cookies, no personal data.

Being listed does not mean a business has joined, partnered with or hired WyldLyfe or MediaWyld.